Functional Check
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The following requirements must be met when fitting the seat belt
- If one of the requirements listed below is not met, the seat belt or the buckle must be replaced.
It must be possible to unroll the belt strap smoothly from the belt retractor via the deflector fitting by pulling evenly.
The tongue of the seat belt must engage audibly in the buckle.
An abrupt pull on the belt strap must lock the belt retractor.