Installing Brake Pedal
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
Installation is in reverse order.
- Do not grease or spray the brake pedal shaft (pin).
- For vehicles with automatic transmission a spacer tube is used instead of the clutch pedal.
- Use new lock nuts.
- Observe correct tightening torques → Tightening Torques For Brake Mechanics .
- Tightening torque for brake pedal shaft (pin): 15 ± 2 ftlb.