LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (92 - Windshield Wiper And Washer System) >> WM 927219 Removing And Installing Spray Nozzle For Headlight Washing System (Except Cayenne Turbo S, Cayenne Diesel, Cayenne S TRANSSYBERIA Tip, Cayenne TRANSSYBERIA Man, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front apron. → Installing front apron
  2. Bleed the spray nozzles. The system is bled by activating the spray nozzles for the headlight washer multiple times. Depending on whether it is a left or right spray nozzle, or whether the water reservoir for the headlight washer was completely emptied or not, the bleeding process can require frequent activations of the spray nozzle.
scientia non olet · About LEMON Manuals