Installing Spray Nozzle For Headlight Washer System
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Install spray nozzle for headlight washer system.
- 1.1. Insert spray nozzle for headlight washer system -1- into the guide and swivel it in -arrow A- .
- 1.2. Push spray nozzle for headlight washer system -1- into the front apron -arrow B- and engage with the clip -arrow C- .
- Secure spray nozzle for headlight washer system on the front apron.
- 2.1. Secure spray nozzle for headlight washer system -3- with the fastening screws -4- on the front apron. → Tightening torque: 1.5 Nm (1.0 ftlb.)
- 2.2. Push water hose -2- onto spray nozzle for headlight washer system -3- (-arrow- ) until the rapid-action coupling -1- engages audibly.
- Engage cap on nozzle head.
- 3.1. Press out nozzle head -1- from the inside -arrow A- hold it securely.
- 3.2. Engage cap -2- at the latches on the nozzle head -1- (-arrows B- ).