Installing Reservoir For Windscreen Washer System

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Ensure water and electrical lines are laid properly.
Insert container in slot in body at 60° to the horizontal.
Connect the two water lines to the pump connections -arrows A- .

Fig 1: Connecting Water Lines To Pump
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Mount water reservoir in vehicle body -A- and press forwards in the slot.

Fig 2: Mounting Water Reservoir In Body
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pivoting container upwards

Fig 3: Pivoting Container Upwards
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
After pivoting up, press the container toward the rear
Secure container with the two fastening screws. → Tightening torque: 4.5 ftlb.

Fig 4: Tightening Fastening Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Slide filler necks into water reservoir, using soap suds. Fit connection piece to coolant reservoir and secure with fastening screw. → Tightening torque: 1.5 ftlb.

Fig 5: Installing Filler Neck
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Connect water line for headlight washer and electric plug connection.

Fig 6: Connecting Water Line For Headlight Washer And Electric Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.