LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (92 - Windshield Wiper And Washer System) >> WM 922719 Removing And Installing Wiper Blade (All Models) >> Installing Wiper Blade

Installing Wiper Blade

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Electrically moved components 
  • Danger of limbs being trapped or severed 

→ Switch off electric power to drive motor.

→ Make sure it does not switch on again.

→ Check that there is no electric charge.

  1. Slide wiper blade onto the wiper arm. Swivel wiper blade by 90°.
    Fig 1: Engaging Wiper Blade
    G09415196Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Check that the wiper blade is fitted securely.
    Fig 2: Wiper Blade Fitted Securely
    G09415197Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Fit cover on the wiper arm and clip it in (only for vehicles specified under → 1).

    Check that the cover is fitted securely.

  4. Spray windscreen with spray nozzles and check function of wiper blades.