LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 323 (61 - Convertible Top, Hardtop -- (981) BOXSTER) >> WM 612855 Replacing Convertible Top Covering (Except CAYMAN, CAYMAN S, CAYMAN GTS, BOXSTER SPYDER) >> Installing Tension Bow And Holder >> Installing Holder

Installing Holder

WARNING: This page is about a different car, the 2016 Porsche Boxster, 2015 Porsche Boxster, 2014 Porsche Boxster, and 2013 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order to removal.

Tightening torque 6 Nm (4.5 ftlb.) 

Information 

Self-tapping screws  , do not pre-cut thread for securing the holder.

Use new screws.

scientia non olet · About LEMON Manuals