LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 323 (61 - Convertible Top, Hardtop -- (981) BOXSTER) >> WM 610119 Removing And Installing Convertible Top (Except CAYMAN, CAYMAN S, CAYMAN GTS, BOXSTER SPYDER) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2016 Porsche Boxster, 2015 Porsche Boxster, 2014 Porsche Boxster, and 2013 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten roll-over bar. →  Installing Roll-Over Bar 
  2. Engage bowden cable. →  Installing Flap  
  3. Install rear wall trim panel. →  Installing trim panel for rear wall 
  4. Install three-point seat belt deflection fitting. →  Installing Front Three-Point Belt