LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 323 (61 - Convertible Top, Hardtop -- (981) BOXSTER) >> WM 610119 Removing And Installing Convertible Top (Except CAYMAN, CAYMAN S, CAYMAN GTS, BOXSTER SPYDER) >> Installing Convertible Top

Installing Convertible Top

WARNING: This page is about a different car, the 2016 Porsche Boxster, 2015 Porsche Boxster, 2014 Porsche Boxster, and 2013 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Fastening screw on front convertible top support/roll-over protection. Tightening torque 46 Nm (34 ftlb.) 
  3. Fastening screw for rear convertible top support. Tightening torque 46 Nm (34 ftlb.) 
  4. Perform a function test.
scientia non olet · About LEMON Manuals