LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 266 (80 Heating -- 92A Cayenne) >> WM 805519 Removing And Installing Front FOOTWELL Outlet Vents (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne (3.0)) >> Preliminary Work >> Preliminary Work For Front Footwell Outlet Vent On Driver's Side

Preliminary Work For Front Footwell Outlet Vent On Driver's Side

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove dashboard bracket. → 516819 REMOVING AND INSTALLING DASHBOARD BRACKET
  2. Pull rear footwell outlet vent off the front footwell outlet vent. → 805719 REMOVING AND INSTALLING REAR FOOTWELL OUTLET VENTS 
  3. Remove temperature sensor from the footwell outlet vent on the driver's side. → 875819 REMOVING AND INSTALLING TEMPERATURE SENSOR
scientia non olet · About LEMON Manuals