Installing Cover For Front Seat
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Fasten covering to the padding, starting from the middle .
- Do so in the following sequence: middle, top/bottom, left/right .
Information
Replace expansion rivets and fixing clips during installation and do not re-use them.
Installation is performed in reverse order. Pay particular attention to the following:
- Tighten fastening screws to Tightening torque 7.5 Nm (5.5 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.) .
- Tighten four fastening screws on the seat-surface extension to Tightening torque 7.5 Nm (5.5 ftlb.) +/- 0.5 Nm (+/-0.5 ftlb.) .