LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (88 Auxiliary Air Conditioning System -- 92A Cayenne) >> WM 882019 Removing And Installing Servo Motor (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne Turbo, Cayenne (3.0)) >> Installing Servo Motor >> Teaching Servo Motor

Teaching Servo Motor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The servo motors only need to be taught if a servo motor is replaced.

  1. PIWIS Tester II 9818  must be connected. Then teach the servo motors.
    1. 1.1. Select vehicle.
    2. 1.2. Select "Air conditioning" control unit.
    3. 1.3. Select "Maintenance and repairs".
    4. 1.4. Select and start "Teach: LIN automatic addressing".
    5. 1.5. Select and start "Alignment drive for LIN servo motors".
    6. 1.6. PIWIS Tester II must then be shut down and disconnected.
scientia non olet · About LEMON Manuals