Installing Rear Door Handle (Inner Part)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Engage bowden cable from the door lock at the inner part of the door handle.
1. 1.1. Engage bowden cable catch in the guide -C- and slide it fully to the right -D- .
  
  Fig 1: Engaging Bowden Cable Catch
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Push bowden cable catch to the rear.
3. 1.3. Press bowden cable housing into the bracket and clip it in -a- .
  
  Fig 2: Clipping In Bowden Cable Housing
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Attach inner part of door handle with mounting bracket.

Fig 3: Attaching Mounting Bracket
Courtesy of PORSCHE CARS NORTH AMERICA, INC.