LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (64 - Glazing, Window Control -- 92A Cayenne) >> WM 646019 Removing And Installing Rear Door Window (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo) >> Installing Rear Door Window

Installing Rear Door Window

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

  1. Fit door window glass into the guide.
    Fig 1: Fitting Door Window
    G09940081Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Fit door window glass as far as it will go into the mounting pieces for the window lifter without forcing it.
  3. Check that the window glass is parallel to the window guide close to the B-pillar.
  4. Tighten fastening screws on the mounting pieces -4-  to Tightening torque 6 Nm (4.5 ftlb.)  , working from the left.
    Fig 2: Tightening Mounting Pieces For Door Window
    G09940082Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Fit two stoppers -3-  in the door sub-frame.
    Fig 3: Fitting Stoppers
    G09940083Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Insert rear window guide.
  7. Insert inner channel strip