LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (5X - Body - General -- 92A Cayenne) >> WM 5X00IN Working With Body Structural Adhesive (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne (3.0)) >> Working With Adhesives >> Joining Process >> Removing Excess Material

Removing Excess Material

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Remove most of the excess material with paper or a cloth.

Finish cleaning visible surfaces with a cloth soaked in acetone.

Hardened material can only be removed mechanically.

scientia non olet · About LEMON Manuals