LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (5X - Body - General -- 92A Cayenne) >> WM 5X00IN Working With Body Structural Adhesive (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne (3.0)) >> Working With Adhesives >> Joining Process >> Joining Components

Joining Components

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Join parts, secure them and weld, rivet and screw them within the processing time.

The joining process must take place immediately after applying adhesive in order to guarantee a high quality and reliable bond.

Otherwise the adhesive bead must be removed and pre-treatment of the surface and application of the adhesive must be repeated.

scientia non olet · About LEMON Manuals