LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (5X - Body - General -- 92A Cayenne) >> WM 5X00IN Working With Body Structural Adhesive (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne (3.0)) >> Information On Structural Bonding In Vehicle Manufacturing >> General

Information On Structural Bonding In Vehicle Manufacturing: General

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Structural bonding in the bodyshell means that the adhesive assumes functions of stiffness, crash strength and endurance strength, whereby the characteristics of the bodyshell are positively influenced in a significant way.

A high-strength, heat-hardening single-component epoxy resin adhesive, which hardens fully in the cathodic immersion paint drying oven, is used for the conventional steel bodyshell.

In the event of repairs, this adhesive is replaced by a cold-hardening two-component epoxy resin adhesive, since the hardening temperatures necessary for the single-component epoxy resin adhesive cannot be used on an assembled vehicle.

scientia non olet · About LEMON Manuals