LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (5X - Body - General -- 92A Cayenne) >> WM 5X00IN Body Parts Of Various Sheet-Steel Strengths (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne (3.0)) >> Straightening Body Parts

Straightening Body Parts

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Only "Original Porsche parts" or sections of "Original Porsche parts" may be used!

The body and floor assembly are made from deep-drawn panels as standard. For this reason, accident damage must be reshaped in the same way. Body repairs can no longer be performed by reshaping if these body parts are deformed. In this case, the body parts must be repaired using new parts or by means of sectional repairs. The separation of damaged body parts after reshaping against the accident direction should not take place until after connection pieces have been straightened.