LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (69 Occupant Protection/Personal Protection -- 92A Cayenne) >> WM 695319 Removing And Installing Triggering Unit For Airbag >> Installing Triggering Unit For Airbag

Installing Triggering Unit For Airbag

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position airbag triggering unit on the center tunnel and secure with the three fastening nuts -1-  . → Tightening Torque: 9 Nm (6.5 ft. lb.) +10 %-15 % 
    Fig 1: Installing Triggering Unit
    G09940518Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Connect electric plug connection.
    1. 2.1. Connect electric connector -arrow-  .
    2. 2.2. Lock locking clip on the connector as far as it will go -b-  .
    3. 2.3. Close the lock on the connector -a-  .
      Fig 2: Connecting Electric Plug
      G09940519Courtesy of PORSCHE CARS NORTH AMERICA, INC.