LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (69 Occupant Protection/Personal Protection -- 92A Cayenne) >> WM 693619 Removing And Installing Adjustment Fitting (Seat Belt Height Adjuster) >> Installing Adjustment Fitting (Seat Belt Height Adjuster)

Installing Adjustment Fitting (Seat Belt Height Adjuster)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Always replace the fastening screws on the three-point seat belt. The micro-self-locking screws must not be treated (e.g. greased) or loosened and then screwed on again.

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screw for the adjustment fitting to Tightening Torque 20 Nm (15 ft. lb.)  .
scientia non olet · About LEMON Manuals