LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (45 Anti Lock Brake System (Abs) -- 92A Cayenne) >> WM 451519 Removing And Installing Rear Speed Sensor (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake calliper and suspend it at a suitable position in the wheel arch (do not open the brake hydraulic system!).

    Also protect the brake calliper (e.g. with a cloth or suitable rubber mat) to prevent damage to the paintwork. → REMOVING REAR BRAKE CALLIPER

scientia non olet · About LEMON Manuals