LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (90 - Instruments -- 92A Cayenne) >> WM 906419 Removing And Installing Control Unit For Auxiliary Alarm System (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Control Unit For Auxiliary Alarm System

Installing Control Unit For Auxiliary Alarm System

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Plug in antenna plug connections for GSM -1-  (red), GPS -2-  (blue) and driver card -3-  (grey) -A-  until they engage securely -B-  .
    Fig 1: Installing Antenna Plug Connections
    G09943076Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Plug in electric plug connection -A-  and fold locking clip over -B-  .
    Fig 2: Installing Auxiliary Alarm System Electric Plug Connection
    G09943077Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Attach tie-wrap.
  4. Position control unit for auxiliary alarm system -2-  on the holder.
  5. Tighten nuts -1-  .
    Fig 3: Installing Control Unit For Auxiliary Alarm System
    G09943078Courtesy of PORSCHE CARS NORTH AMERICA, INC.