LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (90 - Instruments -- 92A Cayenne) >> WM 900319 Removing And Installing Dashboard Inset (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Dashboard Inset >> Removing Dashboard Inset At The Centre

Removing Dashboard Inset At The Centre

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

To reduce the unclipping forces and thereby the risk of damage during removal, the removal steps must be carried out at the accessible connection points using a suitable tool.

  1. Unclip center dashboard inset from the locks -1-  from right to left.
    Fig 1: Identifying Dashboard Screws
    G09943020Courtesy of PORSCHE CARS NORTH AMERICA, INC.