Teaching Additional/Telephone Handset
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Voltage drop
- Risk of damage to control unit
- Fault entries in the control unit
- Coding in the control unit is aborted
- Malfunctions in control unit, even during programming
→ Ensure that the power supply is not interrupted during programming.
→ Connect a battery charger with a current rating of at least → Nominal value: 40 A to the vehicle battery.
Information
Later versions of the software may display slightly different text or require a slightly different procedure. The instructions you receive from the Tester itself take precedence over this description.
- PIWIS Tester 9718 must be connected to the vehicle before starting the System Tester. Switch on ignition. Press [>>] to continue.
- Select vehicle type. Press [>>] to continue.
- Select HeadUnit control unit and press [>>].
- Engage telephone handset in the charging cradle.
- Select the Drive links/Tests menu.
- Select the Teach handset function and press [>>].
- Start the activation process by pressing [F8].
- Follow the instructions on the Tester. The message Handset has been taught must appear. Press [<<] to go back.
- Check the function of the handset.