When Does Lane Change Assist Need To Be Calibrated?

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

The Lane Change Assist control units must be re-calibrated in the following situations:

When one or both Lane Change Assist control units are replaced.
When the installation position of one or both Lane Change Assist control units is changed.
When body repairs are carried out on the rear of the vehicle.
When the rear bumper/rear apron is removed or moved out of position.