LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (91 - Radio, Stereo, Telephone, On-Board Computer -- 92A Cayenne) >> WM 917019 Removing And Installing Control Unit For Lane Change Assist (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear apron. → INSTALLING REAR APRON
  2. If a Lane Change Assist control unit was replaced, the data must be written back into the control unit again using PIWIS Tester II 9818  . → 914355 REPLACING REVERSING CAMERA .
  3. The Lane Change Assist control unit must be calibrated whenever the rear apron is removed/fitted. → 9170K2 CALIBRATING CONTROL UNIT FOR LANE CHANGE ASSIST 
scientia non olet · About LEMON Manuals