LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (91 - Radio, Stereo, Telephone, On-Board Computer -- 92A Cayenne) >> WM 916919 Removing And Installing Front Camera (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Front Camera

Installing Front Camera

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check installation position: Fit the front camera in the front half of the housing in such a way that the electric connection is on the right-hand side.

  1. Installation is performed in reverse order to removal.
  2. Tighten rear fastening screws on front half of front camera housing. Tightening torque 1 Nm (0.5 ftlb.) 
  3. Tighten fastening screws securing front camera housing to front apron. Tightening torque 3 Nm (2 ftlb.) 
scientia non olet · About LEMON Manuals