LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (91 - Radio, Stereo, Telephone, On-Board Computer -- 92A Cayenne) >> WM 914319 Removing And Installing Reversing Camera (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne Turbo, Cayenne S Diesel) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

If the reversing camera was replaced, the values/data must be written back into the reversing camera control unit using PIWIS Tester II 9818  after removing the reversing camera. → 914355 REPLACING REVERSING CAMERA 

Information 

If the reversing camera was removed and installed, the reversing camera must be calibrated using PIWIS Tester II 9818  . → 9143K2 CALIBRATING REVERSING CAMERA 

  1. Install lower part of tailgate trim panel. → INSTALLING TRIM PANEL FOR TAILGATE
scientia non olet · About LEMON Manuals