LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (91 - Radio, Stereo, Telephone, On-Board Computer -- 92A Cayenne) >> WM 914319 Removing And Installing Reversing Camera (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne Turbo, Cayenne S Diesel) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

If the reversing camera has to be removed and installed, the reversing camera must be calibrated using PIWIS Tester II 9818  . → 9143K2 CALIBRATING REVERSING CAMERA 

Information 

If the reversing camera has to be replaced, the values/data must be read out of the reversing camera control unit before removing the reversing camera. → 914355 REPLACING REVERSING CAMERA 

  1. Remove lower part of tailgate trim panel. → REMOVING TRIM PANEL FOR TAILGATE
scientia non olet · About LEMON Manuals