LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (72 - Seat Frames -- 92A Cayenne) >> WM 729419 Removing And Installing Switch For Memory Seat Adjustment (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Switch For Memory Seat Adjustment

Removing Switch For Memory Seat Adjustment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

NOTE: Voltage peaks
  • Risk of damage to electrical load or to the control unit
  1. Pull off electric plug connection for switch for memory seat adjustment.
    Fig 2: Pulling Off Electric Plug Connection
    G09940989Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew five fastening screws -1-  on cover for door opener from the inside of the door panel.
    Fig 3: Identifying Fastening Screws On Cover For Door Opener
    G09940990Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew two fastening screws -2-  on switch for memory seat adjustment.
  4. Slide cover for door opener with switch up slightly -A-  , pull it out of the bracket and then remove it by pulling it forward -B-  .
    Fig 4: Removing Cover For Door Opener
    G09940991Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Remove switch for memory seat adjustment -4-  from cover for door opener -3-  by pulling it inwards.
    Fig 5: Locating Seat Adjustment Switch
    G09940992Courtesy of PORSCHE CARS NORTH AMERICA, INC.