LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (72 - Seat Frames -- 92A Cayenne) >> WM 721919 Removing And Installing Front Backrest Frame (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The required preliminary work and subsequent work can vary depending on equipment.

The instructions provided in the document are for vehicles with the maximum possible equipment.

  1. On vehicles with heated seats:  Connect electric plug connection for seat heating for backrest and secure wire harness. → 741719 REMOVING AND INSTALLING PADDING FOR FRONT BACKREST
  2. Secure wire harness for side airbag at the underside of the seat. → Installing Side Airbag
  3. Secure pressure line (red) under the seat. → 723819 REMOVING AND INSTALLING CONTROL VALVE FOR AIR CUSHION 
  4. Install side trim panel for front seat, without storage tray. → 721619 REMOVING AND INSTALLING FRONT SEAT TRIM PANEL 
  5. Install side cover for backrest and engage rear cover for backrest at the underside of the seat. → 722619 REMOVING AND INSTALLING COVER FOR BACKREST 
scientia non olet · About LEMON Manuals