LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (51 - Body Center, Roof, Frame - 92A Cayenne) >> WM 514555 Replacing Outer Side Member (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preparing Connection Areas Of Body For Installing Outer Side Member

Preparing Connection Areas Of Body For Installing Outer Side Member

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean welding and sealing areas.
    Fig 1: Identifying Body Welding And Sealing Areas
    G09938615Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. Clean the body connecting flanges of underbody protection, adhesive residue and paint in the marked areas.
    2. 1.2. Grind the connecting flanges until bare on both sides.
scientia non olet · About LEMON Manuals