LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (53 - Body Rear - 92A Cayenne) >> WM 536855 Replacing (Inner) Rear Wheel Housing >> Preliminary Work >> Preliminary Work For Body Repairs With Straightening Bench

Preliminary Work For Body Repairs With Straightening Bench

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove accessories in the repair area.
    1. 1.1. Remove accessories in the repair area according to the extent of damage to the vehicle.
  2. Set up straightening bench with straightening set.
    1. 2.1. Equip straightening bench with the straightening attachments according to the setup plans included with the straightening attachments.
  3. Set vehicle on straightening bench.
    1. 3.1. Position vehicle on the straightening bench, align according to the reference holes and bolt firmly to the straightening attachments.
  4. Cover the accessories adjacent to the repair area on the vehicle.
    1. 4.1. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  5. Reshape connection area of the sheetmetal parts to be replaced.
  6. Expose welding areas.
    1. 6.1. Remove undersealing, paint, etc. from the welding areas of the body.
scientia non olet · About LEMON Manuals