LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (53 - Body Rear - 92A Cayenne) >> WM 535655 Replacing Side Panel Bottom Section >> Installing Side Panel Bottom Section >> Notes

Installing Side Panel Bottom Section: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply adhesive.
    Fig 1: Applying Adhesive To Side Panel Bottom Section
    G09939153Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. Evenly apply adhesive to the marked areas.

      Working with body structural adhesive → 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

  2. Fit and secure the side panel bottom section.
  3. Resistance spot-weld the side panel bottom section.
    Fig 2: Identifying Resistance Spot-Weld Side Panel Bottom Section
    G09939154Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Weld in side panel bottom section.
    1. 4.1. Apply a welded seam to the side panel bottom section using inert gas.
      Fig 3: Identifying Weld In Side Panel Bottom Section
      G09939155Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    2. 4.2. Plug-weld the side panel bottom section using inert gas.
scientia non olet · About LEMON Manuals