LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (53 - Body Rear - 92A Cayenne) >> WM 535555 Replacing Rear Side Section (Roof Removed) >> Subsequent Work >> Subsequent Work For Body Repairs (Without Straightening System)

Subsequent Work For Body Repairs (Without Straightening System)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prime joint areas and sheetmetal flanges with 2K primer.
  2. Restore standard seal with body sealant .

    Also seal the repair area carefully.

  3. Paint repair area and adjacent surfaces, if necessary.
  4. Apply standard cavity preservation . Also carefully apply cavity preservation to the repair area.
  5. Install removed accessories in the repair area.
scientia non olet · About LEMON Manuals