LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (53 - Body Rear - 92A Cayenne) >> WM 530555 Replacing Rear Closing Panel >> Subsequent Work >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove vehicle from the alignment bench.
  2. Clean welded joints and sheetmetal flanges with a wire brush.
  3. Prime flange areas with 2K primer.
  4. Restore standard seal with body sealant .
  5. Restore standard undersealing with underbody sealant .
  6. Paint repair area and adjacent surfaces, if necessary.
  7. Apply cavity preservation to the accessible areas of the repair
  8. Install removed accessories in the repair area.
scientia non olet · About LEMON Manuals