Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing anti-roll bar to rear-axle chassis subframe | M10 x 25 thread | Tightening torque | 50 Nm (37 ftlb.) | ||
| Cover to rear-axle valve block | M6 thread | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| No. 5: Cap screws on valve block | M14/M16 thread | Tightening torque | 28 Nm (21 ftlb.) | ||
| No. 6: Cap screws on anti-roll bar | M14/M16 thread | Tightening torque | 28 Nm (21 ftlb.) | ||
| No. 7: Threaded connection securing anti-roll bar to suspension/stabilizer | M12 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 100 Nm (74 ftlb.) |