LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (42 Rear Wheel Suspension, Drive Shafts -- 92A Cayenne) >> WM 429019 Removing And Installing Rear Anti-Roll Bar (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Rear Anti-Roll Bar

Removing Rear Anti-Roll Bar

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove connecting link at the left and right of the anti-roll bar.
  2. Remove four fastening screws on the anti-roll bar and take off the clamps.
  3. Carefully guide out the anti-roll bar.
scientia non olet · About LEMON Manuals