Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing chassis subframe to body (front) | M14 x 1.5 x 150 thread (always replace screws and lock nuts after removal) | Tightening torque | 120 Nm (89 ftlb.) | +180 angular degrees | |
| No. 2: Threaded connection securing chassis subframe to body (rear) | M14 x 1.5 x 150 thread (always replace screws and lock nuts after removal) | Tightening torque | 120 Nm (89 ftlb.) | +180 angular degrees | |
| No. 2/3: Threaded connection securing suspension/stabilizer to wheel carrier/shock absorber strut | M12 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 Nm (67 ftlb.) | +90 angular degrees | |
| No. 5: Cap screws on valve block | M14/M16 thread | Tightening torque | 28 Nm (21 ftlb.) | ||
| Fastening screw securing center bearing to body | Initial tightening | 20 Nm (15 ftlb.) | |||
| Fastening screw securing center bearing to body | Final tightening | +90° |