LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (82 Auxiliary Heating -- 92A Cayenne) >> WM 822019 Removing And Installing Complete Auxiliary Heating (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne Turbo, Cayenne (3.0)) >> Installing Complete Auxiliary Heating >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect battery ground strap and carry out work instructions after connecting the battery → 270619 REMOVING AND INSTALLING BATTERY .
  2. Install front left wheel housing liner → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER .
  3. Fit the left front wheel → 440519 REMOVING AND INSTALLING WHEEL .
  4. Bleed the cooling system → 193817 DRAINING AND FILLING COOLANT (INCLUDES BLEEDING) .
  5. Fill fuel line.
    1. 5.1. Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on ignition. Press [F12] to continue.
    2. 5.2. Select the vehicle type and start the PIDT.
    3. 5.3. Select the Auxiliary heating  control unit in the overview  .
    4. 5.4. Select the Maintenance/repairs  menu.
    5. 5.5. Line filling  must now be selected. Then press [F12] to continue.
    6. 5.6. Start the filling process by pressing [F8].
scientia non olet · About LEMON Manuals