LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 247 (20 - Fuel Supply, Control -- 92A Cayenne) >> WM 200101 Checking Fuel System (High-Pressure Side) For Leaks (Cayenne S & Cayenne GTS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove tool setup.
  2. Fit the fuel line. To do this, fit the fuel supply line (low pressure) at the marking correctly. Counter while fitting. → Tightening torque: 35 Nm (26 ft. lb.) 
  3. Fit engine cover. For details, see → Installing front trim panel (engine compartment) - section on "Installing"
  4. Fit the fuse or connect the battery.
  5. Bleed the fuel high-pressure system. → 2430B1 FILLING AND BLEEDING THE FUEL HIGH-PRESSURE SYSTEM (INCLUDES BLEEDING FUEL DISTRIBUTOR PIPE)
scientia non olet · About LEMON Manuals