LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (63 - Bumpers -- 92A Cayenne) >> WM 635719 Removing And Installing Rear Retaining Strip (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Rear Retaining Strip >> Installing Side Retaining Strip

Installing Side Retaining Strip

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit side retaining strips.
  2. Screw in fastening screws -1-  and tighten to Tightening torque 3 Nm (2 ftlb.)  .
    Fig 1: Installing Side Retaining Strip
    G09939999Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals