Installing Front Bumper
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Some of the repair illustrations show only one side of the vehicle.
- Naturally, some steps also have to be performed on the opposite side of the vehicle as well.
- Fit the bumper between the lock carrier and longitudinal member from underneath and position it.
- Installation is performed in reverse order to removal.
- Tighten fastening screws for the body to Tightening torque 60 Nm (44 ftlb.) +/-5 Nm (+/-3.5 ftlb.) .
- Tighten fastening screws on body mounts to Tightening torque 25 Nm (19 ftlb.) +/-2.5 Nm (+/-2 ftlb.) .
- Tighten fastening screws on the lock carrier to Tightening torque 12 Nm (9 ftlb.) +/-1 Nm (+/-0.5 ftlb.) .
- Tighten fastening screw on the lock support to Tightening torque 9 Nm (6.5 ftlb.) +/-9 Nm (+/-6.5 ftlb.) .