Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw on engine suspension eyelet | Tightening torque | 27 Nm (20 ft. lb.) | |||
| Fastening screw on insulation plate | Tightening torque | 5 Nm (3.5 ft. lb.) | |||
| Fastening screw on throttle valve control unit | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening screw for connection piece | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening screw on holder | Tightening torque | 9 Nm (6.5 ft. lb.) | |||
| Fastening screw on regulating valve control unit | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening screw for intake air temperature sensor | Replace | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Fastening nut on compressor | Tightening torque | 20 Nm (15 ft. lb.) | |||
| Fastening screw for boost pressure sensor | Replace | Tightening torque | 10 Nm (7.5 ft. lb.) |