Technical Values: Overview

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value
Fastening Screw For Positive Crankcase Ventilation Line	Replace Aluminum Screw	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw For Positive Crankcase Ventilation Line		Final Tightening	+90°
Fastening Screw Securing Positive Crankcase Ventilation Valve To Cylinder Head Cover	M6 x 30	Tightening Torque	10 Nm (7.5 ft. lb.)
Fastening Screw For High-Pressure Line		Tightening Torque	10 Nm (7.5 ft. lb.)
Union Nuts On High-Pressure Lines	Coat Ball/Conical Joint With Microgleit 977S.	Initial Tightening	20 Nm (15 ft. lb.)
Fastening Screw For High-Pressure Line		Tightening Torque	10 Nm (7.5 ft. lb.)
Union Nuts For High-Pressure Lines		Final Tightening	+35 Nm (+26 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head	Aluminum Screw, M6 x 30/Replace	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head	Steel Screw, M8 x 35	Tightening Torque	23 Nm (17 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head	Aluminum Screw, M8 x 35/Replace	Initial Tightening	10 Nm (7.5 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head		Final tightening	+90°
Fastening screw securing valve cover to cylinder head	Aluminum screw, M6 x 30/replace	Initial tightening	4 Nm (3 ft. lb.)
Fastening screw securing valve cover to cylinder head		Final tightening	+90°
Fastening screw securing valve cover to cylinder head		Torque angle	-180°
Fastening screw securing valve cover to cylinder head	Aluminum screw, M6 x 30/replace	Initial tightening	4 Nm (3 ft. lb.)
Fastening screw securing valve cover to cylinder head		Final tightening	+90°
Fastening screw securing valve cover to cylinder head	Aluminum screw, M6 x 30/replace	Initial tightening	4 Nm (3 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head	Steel screw, M8 x 44	Tightening Torque	23 Nm (17 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head	Aluminum Screw, M8 x 35/Replace	Initial Tightening	10 Nm (7.5 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head		Final Tightening	+90°
Fastening Screw Securing Valve Cover To Cylinder Head	Aluminum Screw, M6 x 30/Replace	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head		Final Tightening	+90°
Fastening Screw Securing Valve Cover To Cylinder Head		Torque Angle	-180°
Fastening Screw Securing Valve Cover To Cylinder Head	Aluminum Screw, M6 x 30/Replace	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw Securing Valve Cover To Cylinder Head		Final Tightening	+90°