LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (15 - Engine - Cylinder Head, Valve Control -- 92A Cayenne) >> WM 158219 Removing And Installing Cylinder Head Cover (V6) (Cayenne GTS & Cayenne S) >> Subsequent Work >> Subsequent Work For Cylinders 1 - 3

Subsequent Work For Cylinders 1 - 3

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install solenoid/hydraulic valve for camshaft controller. → 153719 REMOVING AND INSTALLING SOLENOID/HYDRAULIC VALVE FOR CAMSHAFT CONTROLLER 
  2. Install ignition coils. → 282020 REMOVING AND INSTALLING IGNITION COILS
  3. Install high-pressure pump. → 246319 REMOVING AND INSTALLING HIGH-PRESSURE PUMP
  4. Install positive crankcase ventilation valve. → 105119 POSITIVE CRANKCASE VENTILATION VALVE
  5. Fit engine in its original position using special tool 9866.

    For better access to the fastening screws on the cylinder head cover  .

  6. Install torque support. → 103719 REMOVING AND INSTALLING TORQUE SUPPORT
scientia non olet · About LEMON Manuals