Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Components | Temperature | 17°C | |||
| Cylinder-Head Screws (Internal Serration) | M9 x 1.25 x 141 (7 ea., Center) and M9 x 1.25 x 111 (13 ea., Outer), Always Replace | Initial Tightening | 15 Nm (11 ft. lb.) | ||
| Cylinder-Head Screws (Internal Serration) | Tightening Torque | 30 Nm (22 ft. lb.) | |||
| Cylinder-Head Screws (Internal Serration) | Torque angle | 180° | |||
| Timing-Case Cover To Cylinder Head | M8 | Tightening Torque | 23 Nm (17 ft. lb.) | ||
| Oval-Head Screw On Timing Chain Housing | M6 x 25 | Tightening Torque | 8 Nm (6 ft. lb.) | ||
| Hexagon-Head Bolts On Oil Pump | M8 x 20 | Tightening Torque | 8 Nm (6 ft. lb.) | ||
| Chain Tensioner | M22 x 1.5 x 18.7 | Tightening Torque | 40 Nm (30 ft. lb.) | ||
| Bearing Pin On Guide Rail For Drive Chain | M8 x 11.5 | Tightening Torque | 10 Nm (7.5 ft. lb.) | ||
| Hexagon-Head Bolt On Drive Wheel For Timing Chain | M10 x 40 (always Replace) | Initial Tightening | 60 Nm (44 ft. lb.) | ||
| Hexagon-Head Bolt On Drive Wheel For Timing Chain | Torque Angle | 90° | |||
| Bolt For Guide Rail | Tightening Torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening Screw On Guide Rail | Tightening Torque | 20 Nm (15 ft. lb.) | |||
| Hexagon-Head Bolt On Guide Rail | M8 x 45 | Tightening Torque | 23 Nm (17 ft. lb.) | ||
| Hexagon-Head Bolts On Camshaft Controllers | M12 X 1.5 X 85 (Always Replace) | Initial Tightening | 60 Nm (44 ft. lb.) | ||
| Hexagon-Head Bolts On Camshaft Controllers | Torque Angle | 90° |