LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (15 - Engine - Cylinder Head, Valve Control -- 92A Cayenne) >> WM 157019 Removing And Installing Cylinder Head (V8) (Cayenne Turbo & Cayenne Turbo S) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit deflector rail. → 154719 REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS 
  2. Install camshafts. → 150520 REMOVING AND INSTALLING CAMSHAFTS 
  3. Fit timing chain. → 153519 REMOVING AND INSTALLING TIMING CHAINS 
  4. Fit timing-case cover. → 153319 REMOVING AND INSTALLING TIMING-CASE COVER 
  5. Set the timing. → 150516 SETTING TIMING FOR CAMSHAFTS 
  6. Fit the fuel distributor pipe. → 243019 REMOVING AND INSTALLING FUEL DISTRIBUTOR PIPE
  7. Fit intake-air distributor. → 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR
  8. Fit the turbocharger on V8 turbo engines. → 213019 REMOVING AND INSTALLING TURBOCHARGER
  9. Take the engine from the assembly support and connect it to the transmission. → 100127 REMOVING ENGINE FROM TRANSMISSION AND MOUNTING ENGINE ON TRANSMISSION .
  10. Install the engine. → 100119 REMOVING AND INSTALLING ENGINE
scientia non olet · About LEMON Manuals