Installing Timing Chain
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The rolling direction of the timing chain must always be the same .
- If the timing chain is to be reused, the rolling direction of the timing chain must be marked before it is removed .
Information
If the timing chain has to be removed or replaced, check the guide and tensioning rails as well as the chain pinions for wear and scoring and replace them if necessary.
Camshaft timing gears and camshaft controllers must be fitted and it must be possible to turn them (without tilting).
- Check that the guide and tensioning rails are installed at the correct position.
- Place timing chain loosely on all sprockets. Ensure that the timing chain is positioned correctly on the guide rails.