Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic Value
Chain Tensioner		Tightening Torque	60 Nm (44 ft. lb.)
Fastening Screw Securing Joint Flange To Timing-Case Cover, Top	Aluminum Screw Must Be Replaced	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw Securing Joint Flange To Timing-Case Cover, Top		Final Tightening	+90°
Fastening Screw Securing Joint Flange To Timing-Case Cover, Bottom	Aluminum Screw Must Be Replaced	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw Securing Joint Flange To Timing-Case Cover, Bottom		Final Tightening	+90°
Fastening Screw For Timing-Case Cover	Replace Aluminum Screw	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw For Timing-Case Cover		Final Tightening	+90°
Fastening Screw For Timing-Case Cover	Replace Aluminum Screw	Initial Tightening	10 Nm (7.5 ft. lb.)
Fastening Screw For Timing-Case Cover		Final Tightening	+90°
Fastening Screw Securing Crash Support To Oil Guide Housing	M8 x 20	Tightening Torque	23 Nm (17 ft. lb.)
Fastening Screw Securing Crash Support To Timing-Case Cover/Oil Guide Housing	Aluminum Screw, M6 x 30/Replace	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw Securing Crash Support To Timing-Case Cover/Oil Guide Housing		Final Tightening	+90°
Components		Temperature	17°C
Timing-Case Cover		Length	0.1 mm
Fastening Screw For Timing-Case Cover	Replace Aluminum Screw	Initial Tightening	4 Nm (3 ft. lb.)
Fastening Screw For Timing-Case Cover		Final Tightening	+90°
Fastening Screw For Timing-Case Cover	Replace Aluminum Screw	Initial Tightening	10 Nm (7.5 ft. lb.)
Fastening Screw For Timing-Case Cover		Final Tightening	+90°